635W and 640W
Eight 635W panels make 5.08kW DC; eight 640W panels make 5.12kW. Compare the full array total and actual roof layout before paying for the small output difference.
Compare AIKO solar panel prices in Pakistan for Stellar and supplier-listed Polaris offers. Review ABC back-contact technology, exact rated wattages and whole-array cost.
AIKO solar plate prices in Pakistan should be compared using the exact Stellar module code, output and construction. The listed offers include 635W, 640W, 655W and 665W ratings. Check the quoted panel total alongside the rate per watt.
AIKO describes its Stellar range using ABC back-contact technology. Some seller titles use Polaris or other technology wording. Request the matching manufacturer code before assuming that differently labelled offers are the same module.
On a roof with limited usable space, compare actual efficiency and installed layout rather than the family name alone. A higher-output panel is useful only when its format, mounting and electrical requirements suit the proposed system.
Compare exact models, wattages, technology, price per watt and quoted panel totals.
| Brand / model | Wattage | Technology | Price / watt | Panel price | Warranty / stock |
|---|---|---|---|---|---|
| AIKO Stellar 665 Watt, Dual… | 665W | N-Type, HPBC 3.0 | Rs. 43.90/W | Rs. 29,193 | In Stock |
| AIKO Stellar 620, 625, 630,… | 635W | N-Type, ABC, Bifacial | Rs. 40.03/W | Rs. 25,420 | In Stock |
| AIKO Stellar 640 Watt N-Type… | 640W | N-Type, Bifacial | Rs. 41.50/W | Rs. 26,560 | In Stock |
| AIKO Stellar 645, 650, 655… | 655W | N-Type, ABC, Bifacial | Rs. 43.75/W | Rs. 28,656 | In Stock |
Request a quotation with the exact model, rated output and delivered price.
Confirm the final seller total, stock and included charges. A rounded per-watt figure may not multiply back to the exact quoted panel price.
Choose a rated wattage to see matching offers. Several sizes in a listing title do not establish the price or availability of every variant.
Eight 635W panels make 5.08kW DC; eight 640W panels make 5.12kW. Compare the full array total and actual roof layout before paying for the small output difference.
A listing mentioning 645W, 650W and 655W may quote only the 655W variant. Sixteen 655W panels make 10.48kW DC. Request a separate quote when you need exactly 650W.
Fifteen 665W modules make 9.975kW, just below 10kW; sixteen make 10.64kW. A strict target and a roughly 10kW design can therefore lead to different panel counts.
Compare the exact AIKO model with an equivalent-output TOPCon or other back-contact module. Check efficiency, footprint, temperature coefficient, warranty route and installed array cost rather than assuming a technology premium is always worthwhile.
AIKO’s official Stellar product guide identifies ABC technology. Use the full AIKO module code to check the actual model. ABC, TOPCon and HPBC labels should not be treated as interchangeable descriptions.
Some supplier listings use Polaris alongside Stellar and ABC. Keep that title for reference, but request the complete manufacturer model and label photograph before accepting it as a precise product identity.
A supplier-listed 665W row uses HPBC wording. AIKO’s Stellar guide describes ABC, so confirm that offer’s label and datasheet with the seller before purchasing. The price table preserves the supplied description instead of silently changing the product details.
The Stellar range includes dual-glass offers. Check whether the exact module is bifacial and what mounting conditions support rear-side light. Neither dual glass nor back contact alone establishes a fixed rear-generation gain.
Identify the module family using the AIKO Stellar ABC product guide ↗, then match the complete code on the label and invoice.
Multiply rated watts by the quoted rate to estimate one panel, then multiply by your quantity. As an illustration, a 600W module at Rs. 40/W costs Rs. 24,000; a 625W module at that rate costs Rs. 25,000.
Enter the rate from your supplier’s quotation. Panel-only prices do not automatically include an inverter, mounting structure, wiring, protection, installation or batteries. Request an itemised offer when comparing a complete system.
Review a listed module, then match its complete manufacturer code to the corresponding datasheet. Check dimensions, efficiency and electrical ratings for that exact output variant.
Supplier titles do not include a complete manufacturer code for every offer. Confirm numerical dimensions, efficiency and electrical values from the matching document; specifications from a similarly named panel may differ.
Length multiplied by width gives the module footprint. Leave room for roof edges, obstructions, walkways and the proposed mounting layout. Check the approved support points and frame instructions before ordering.
Efficiency describes conversion at the stated test conditions. The power temperature coefficient describes the response to changing cell temperature. Neither figure by itself predicts annual generation on your property.
Eight 625W panels make 5.00kW DC; sixteen make 10.00kW. Nine 600W panels make 5.40kW; seventeen make 10.20kW. Divide the DC target in watts by panel wattage, then choose a whole-panel count.
The tool rounds upward to reach your target and also shows one panel fewer. Final design must check permitted inverter loading, cold-weather string voltage, current and MPPT limits. DC panel capacity is different from AC inverter output.
Compare an exact AIKO model with an exact Jinko, Canadian Solar or other competing module at the same purchase quantity. Price per watt, efficiency, module size, temperature coefficient and local warranty support all affect the choice.
Use the same DC target and calculate the whole-panel count for each option. Compare the achievable capacity and total module price, then account for mounting and installation differences. The cheapest single panel may not produce the lowest system budget.
Confirm grade documentation, taxes, transport and warranty handling in both quotations. A technology name or brand reputation should not replace the datasheet, serial evidence and written terms for the actual modules supplied.
For a quotation in Karachi, Lahore, Islamabad or another city, ask for a delivered price and a clear local support route. Keep the invoice, serial information and applicable warranty documents.
Listed rates span Rs. 40.03–43.90/W across the models in this guide. Compare the exact rated wattage and quoted panel total, then confirm stock and a written seller quotation.
Solar plate and solar panel commonly mean the same photovoltaic module. The full model code, rated watts and specification identify the product; the wording alone does not establish another quality grade.
No exact 585W offer is currently listed for this brand. Request a specific quotation; a different rated variant with 585W in its title does not establish a 585W price.
Multiply rated watts by the quoted rupees per watt. For example, 600 × Rs. 40 = Rs. 24,000. This is illustrative arithmetic; confirm the final module total and included charges with the seller.
These are different technology labels. AIKO identifies its Stellar range with ABC. If a seller uses HPBC for an AIKO offer, ask for the full label and matching manufacturer document before accepting the description.
Fifteen total 9.975kW DC. Sixteen total 10.64kW. The final count depends on the chosen DC target, permitted inverter loading and roof layout.
Rear contribution depends on mounting height, roof reflectivity, shading and layout. Compare front-side rated output and request a site-specific yield estimate rather than assuming a fixed gain.
Only if the written quote says so. An inverter, mounting, wiring, protection, labour, transport and optional batteries usually need separate budget lines.
Ask the installer to check current and voltage compatibility. The complete string must meet the inverter’s input limits; physical fit and rated wattage alone are not enough.
Check product and power warranties separately, match the warranty document to the full model code, and confirm the local claim process and supplier documentation.
Tell us about your electricity usage, property, and installation requirements. Our solar installation partners will provide a tailored system and installation quote for your home or business.